Skip to content

Cheap Lasers Could Stop Plane Crashes

August 7, 2012
 

Artist's impression of the laser-based sensor augmenting a pitot tub. Image: Sven WittigA low-cost laser sensor that can quickly and accurately measure the velocity of commercial passenger aircrafts could complement existing sensors and help prevent fatal airplane crashes, say Univ. of New South Wales engineers.

Using facilities provided by the Defence Science and Technology Organisation in Melbourne, researchers from UNSW Canberra have developed and successfully tested a proof-of-concept laser-based sensor in a high-speed wind tunnel.

“One of the problems with current velocity sensors is that they are susceptible to icing in bad weather,” says Sean O’Byrne from the School of Engineering and Information Technology. “Our technology is based on laser light, meaning there are no physical components in the airflow. Instead they are located inside the aircraft where the temperature can be controlled.”

Currently used airspeed sensors – known as Pitot tubes – have been considered possible failure points for several fatal aircraft accidents, most recently, Air France flight 447, which crashed into the Atlantic Ocean in June 2009. 

Accident investigators suspect that a severe storm caused the forward facing pressure holes on the Pitot tube on flight 447 to fill with ice, which prevented the pilots from receiving accurate measurements.

“Pitot tubes are simple and reliable instruments, but when they get obstructed, either by ice, dirt build-up, or by birds or insects flying into them, they don’t tell you your correct speed,” says O’Byrne. “Then you need to rely on backup plans, like GPS, which in storm conditions may not do the job. The technology we have developed measures airspeed like a Pitot tube, but doesn’t have something poking out into the air. It has a window, which can be built into a recess in the body of the plane, and which can be heated. This also means, in sudden icing situations, it can be kept out of the wind.” 

And while it’s not designed to replace the Pitot tubes entirely, the researchers say it can be used as a low-cost measure to augment the tubes, which will give flight staff more confidence in their readings and help guard against fatal crashes.

O’Byrne says the sensor employs the same technology used in laser computer mice, and measures velocity by using the Doppler shift of the light absorbed by oxygen molecules.

The idea for the sensor was born out of the group’s work on the SCRAMSPACE project. The next step is to scale down the proof-of-concept into an aircraft-ready design and conduct flight tests.

Advertisements
No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s